Type Managed | Switch layer L2/L3 | Quality of Service (QoS) support Yes | 10xBasic switching RJ-45 Ethernet ports quantity | Basic switching RJ-45 Ethernet ports type 10G Ethernet (100/1000/10000) | 2xSFP+ module slots quantity | Yes | Port mirroring Yes | Switching capacity 240 Gbit/s | Throughput 120 Gbit/s | Forwarding rate 179 Mpps | Rack mounting Yes | Stackable Yes | Form factor 1U | Product colour Grey | Power source AC/DC | Power supply included Yes | Power over Ethernet (PoE) Yes | 10xPower over Ethernet 4PPoE (PoE++) ports quantity | Power over Ethernet (PoE) power per port 15.4 W | Total Power over Ethernet (PoE) budget 400 W | Width 442.4 mm | Depth 285 mm | Height 44 mm | Weight 4600 g
1U, professional-grade 10-port, Layer 3 Etherlighting™ PoE+++ switch with (10) 10 GbE and (2) 10G SFP+ ports.
| Summary | Ubiquiti UniFi Pro XG 10 PoE. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 10. MAC address table: 32000 entries, Switching capacity: 240 Gbit/s. Power connector: AC/DC. Power over Ethernet (PoE). Rack mounting, Form factor: 1U |
| Unit Box Height | 0.39 |
| Unit Box Length | 0.52 |
| Unit Box Width | 0.12 |
| Quality of Service (QoS) support | Yes |
| Switch layer | L2/L3 |
| Switch type | Managed |
| 10G Ethernet (copper) ports quantity | 10 |
| Basic switching RJ-45 Ethernet ports quantity | 10 |
| Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
| Power connector | AC/DC |
| SFP+ module slots quantity | 2 |
| 10G support | Yes |
| Broadcast storm control | Yes |
| Flow control support | Yes |
| IPv4 routes | 12000 |
| Number of VLANs | 1000 |
| Port mirroring | Yes |
| Rate limiting | Yes |
| Virtual LAN features | Interface-based VLAN/Voice VLAN |
| VLAN support | Yes |
| Forwarding rate | 179Mpps |
| Jumbo frames support | Yes |
| MAC address table | 32000entries |
| Packet buffer memory | 2MB |
| Static route | Yes |
| Switching capacity | 240Gbit/s |
| Throughput | 120Gbit/s |
| DHCP features | DHCP guarding/DHCP relay/DHCP server/DHCPv6 snooping |
| IGMP snooping | Yes |
| Loop protection | Yes |
| Multicast support | Yes |
| Backlight display | Yes |
| Display type | LCM |
| Form factor | 1U |
| Housing material | SGCC |
| LED indicators | System |
| Product colour | Grey |
| Rack mounting | Yes |
| Reset button | Yes |
| Stackable | Yes |
| AC input frequency | 50/60Hz |
| AC input voltage | 100 – 240V |
| Power consumption (max) | 520W |
| Power source | AC/DC |
| Power supply included | Yes |
| Redundant power supply (RPS) support | Yes |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) power per port | 15.4W |
| Power over Ethernet (PoE) type supported | PoE++ (4PPoE) |
| Power over Ethernet 4PPoE (PoE++) ports quantity | 10 |
| Total Power over Ethernet (PoE) budget | 400W |
| Operating relative humidity (H-H) | 10 – 90% |
| Operating temperature (T-T) | -5 – 40°C |
| Depth | 285mm |
| Height | 44mm |
| Weight | 4600g |
| Width | 442.4mm |
| Cables included | Power |
| Manual | Yes |
| Rack mount kit | Yes |
| Compliance certificates | CE/Federal Communications Commission (FCC)/Industry Canada (IC)/National Defense Authorization Act (NDAA) |
| Model | USW-PRO-XG-10-POE |
| Units per Pallet | 0 |
| Units per Shipping Box | 2 |
| Unit Calculated Volume | 0.02894cubm |
| Unit Calculated Weight | 6.25kg |
Switch DAHUA PFS3110-8ET-96-V2 PoE ports 8 96 Watts DH-PFS3110-8ET-96-V2
Switch DAHUA DH-SG4028 SG4028
Switch DAHUA LR2110-8ET-120-V2 PoE ports 8 DH-LR2110-8ET-120-V2 










There are no reviews yet.